CAR OBD CODES

P0340 OBD Code Definition:
P0340 Camshaft Position Sensor Circuit Bank 1 Sensor 1
P0340 OBD Code Description:

OBD2 Code P0340 Definition:
This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit – the sensor itself, the wiring, or the PCM. Don’t just replace the CPS (camshaft position sensor) and think that will definitely fix it. Symptoms

Possible sumptoms of P0340
Symptoms can include: Hard starting or no start Rough running / misfiring Loss of engine power Possible Causes

Possible causes of P0340
A code P0340 could mean one or more of the following has happened: a wire or connector in the circuit could be grounded/shorted/broken the camshaft position sensor may have failed the PCM may have failed there exists an open circuit the crankshaft position sensor may have failed Possible Solutions

With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try: Visually inspect all the wiring and connectors in the circuit Check for continuity in the circuit wiring Check the operation (voltage) of the camshaft position sensor Replace the camshaft position sensor as required Check the crankshaft position circuit as well Replace circuit wiring and/or connectors as required Diagnose/replace the PCM as required
Note: The information on the P0340 error code is purely informative, if you need more useful information, please consult your technician.