CAR OBD CODES

P0704 OBD Code Definition:
P0704 Clutch Switch Input Circuit Malfunction
P0704 OBD Code Description:

OBD2 Code P0704 Definition:
When the clutch pedal is depress the voltage signal from the clutch switch to the Engine Control Module (ECM) is low. If the ECM does not see this change from high to low when the vehicle is over 0 mph, the ECM sets code P0704. Symptoms

Possible sumptoms of P0704
– Engine Light ON (or Service Engine Soon Warning Light) Possible Causes

Possible causes of P0704
– Open or short clutch switch circuit – Poor clutch switch circuit connection – Damage clutch switch – Misadjusted clutch switch – Damage ECM The Error code is generally activated on detection of the following conditions: ECM did not detect any movement in the clutch pedal position switch Possible Solutions

Check clutch switch adjustment, the switch should open and close when the clutch pedal is depress. If the switch is properly adjusted, replaced the clutch switch to resolve problem.
Note: The information on the P0704 error code is purely informative, if you need more useful information, please consult your technician.